Tribute LX 2WD V6-3.0L DOHC (2001)
27. Remove the front seat cushion pan.
1. Remove the bolts.
2. Remove the front seat cushion pan.
28. Remove the seat adjuster.
1. Unclip the seat adjuster pins.
NOTE: Note the routing of the wiring harness for installation.
29. Remove the safety belt pretensioner.
1. Remove the bolt.
2. Remove the safety belt pretensioner.
Installation
WARNING: Always wear safety glasses when repairing an air bag supplemental restraint system (SRS) vehicle and when handling an air bag
module. This will reduce the risk of injury in the event of an accidental deployment.
WARNING: Carry a live side air bag module with the air bag and tear seam pointed away from your body. This will reduce the risk of injury
in the event of an accidental deployment.
WARNING: Do not set a live side air bag module down on the cover tear seam. This will reduce the risk of injury in the event of an accidental
deployment.
WARNING: After deployment, the air bag surface can contain deposits of sodium hydroxide, a product of the gas generant combustion that is
irritating to the skin. Wash your hands with soap and water afterward.
