mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Sensors and Switches - Restraint Systems > < Safety Belt Buckle and Pretensioner Removal and Installation|Page 5612
Page 2
background image

4. Connect the special tool to the battery.

1. Connect the red clip to the positive battery terminal.
2. Connect the black clip to the negative battery terminal.

5. Verify that the red light on the special tool is illuminated.
6. Make sure all personnel are at least 6.1 meters (20 feet) away from the air bag module.

7. Using the special tool, deploy the air bag module by pressing the activation switch.

Sensors and Switches - Restraint Systems > < Safety Belt Buckle and Pretensioner Removal and Installation|Page 5612