mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Impact Sensor|Service and Repair > < Safety Belt Buckle and Pretensioner Removal and Installation|Page 5613
Page 1
background image

Impact Sensor: Description and Operation

Sensors

WARNING:  The restraints control module (RCM) orientation is critical for correct system operation. If a vehicle equipped with an air bag
supplemental restraint system (SRS) has been involved in a collision in which the center tunnel area has been damaged, inspect the mounting
and bracket for deformation. If damaged, the RCM must be replaced whether or not the air bags have deployed. In addition, make sure the
area of the RCM mounting is restored to its original condition.

For this vehicle, the SRS employs three crash sensors. One of the sensors is integral to the RCM and is not serviceable separately. In addition, there are
two side crash sensors located in the LH and RH B-pillars. The RCM is mounted on the center tunnel under the instrument panel. Mounting orientation is
critical for correct operation of all crash sensors.

Impact Sensor|Service and Repair > < Safety Belt Buckle and Pretensioner Removal and Installation|Page 5613