300SE (140.032) L6-3.2L (104.990) (1992)
/l6-3.2l_(104.990)/Page-2721007.png)
4. Unhook wooden cover at rear using special tool 140 589 16 63 00 by inserting blade of special tool between wooden cover and upholstery on door
panelling, then pull special tool all the way up (arrows). At the same time the two rotating bars are turned back (refer to item 6, arrows).
5. Tip wooden cover toward inside at top and bottom using special tool.
Wooden cover-rear
6. Remove wooden cover toward front.
7. Unscrew the screws in area of door handle (arrows).
8. Open cover above door pocket.
