300SE (140.032) L6-3.2L (104.990) (1992)
1
Pull off vapor seal on interior door panel.
2
Unclip retaining strap on window lift bar and remove.
3
Disconnect electrical connections on window lift motor.
4
Drill out rivets (5 each); use bit with diameter of 4.8 mm.
5
Remove slider by moving rear window lift mechanism back and forth on window lift bar.
6
Push window up by hand and secure against falling.
7
Remove rear window lift mechanism through installation opening in interior door panel.
8
Remove remaining pieces of rivets in rear window lift mechanism and in door shaft.
9
Insert rear window lift mechanism through installation opening in interior door panel and simultaneously guide slider into window lift bar.