300TE (124.090) L6-3.0L (103.983) (1989)
Seat Back: Service and Repair
Remove and Install Gear Unit For Backrest
Removal and installation of gear unit for backrest
Screw (6), 2 each, unscrew
Clamping member (1), remove, disengage covering laterally
Flexible shaft (2), pull out of gears
Trim (7), force off
Handwheel (8), force off uniformly
Cover (9), unbend lock and force off remove
Gear cover (10), remove
Rivet 4x6.1 (11), 3 each, bore out
Gears, remove, during installation in backrest frame lock and fasten rivet, part no.910002
Remove and Install
1. Remove clamping member (91-190).
2. Remove flexible shaft (2) from gears.
3. Force off trim (7) with plastic wedge.
4. Uninformly force off handwheel (8) by means of 2 plastic wedges.
5. Unbend lock on cover (9) and remove from shaft.