500SEL (126.037) V8-5.0L (117.963) (1984)
/v8-5.0l_(117.963)/Page-1608002.png)
7 Coat coil at end of new control cable with MB slide paste, part no. 001 989 14 51 and introduce into tubing.
NOTE: When installing control cable, make sure that the guide member on control cable slides into opening of tubing.
8 A force of max. 80 N should be enough to pull out control cable. Checkup should be made with a spring scale.
9 Slip control cable completely into tubing and push actuating switch to "Lowering roof", then let control cable enter gear unit until the bores of guide
plate and transport bridge are overlapping.
10 Screw guide plate to transport bridge.
11 Install sliding roof headlining.
