500SEL (126.037) V8-5.0L (117.963) (1984)
Fig. 16 Removing axial cylinder roller cage & axial disc
17.
Remove steering worm (3) from bearing cap (7), then the axial cylinder roller cage (32) from steering worm, Fig. 16.
18.
On type 1 steering gear, remove sealing ring (30) and O-ring (29) from steering worm (3), Fig. 12.
19.
On type 2 steering gear, remove sealing ring (88) and O-ring (89) from bearing cap, Fig. 13.
20.
On all gears, remove axial washer (61) from bearing cap.
Fig. 17 Removing hex screws, fastening clip & ball guide halves
21.
Remove hex screws (45), mounting clip (44) and both ball guide halves (43), Fig. 17.
Fig. 18 Removing slot nut & screw cover