C 230 (203.040) L4-1.8L SC (271.948) (2005)
/l4-1.8l_sc_(271.948)/Page-782005.png)
8 Detach the insertion tool (6) from the crankshaft flange (3).
Lift the protective lip (1 s) carefully and check the correct installation position of the sealing lip (1 d).
An incorrect installation position leads to leakage, which causes engine, clutch and environmental damages. m The sealing lip (1 d) must point to the
crankcase (4) along the entire circumference.
10 Check the correct installation position of the protective lip (1s).
An incorrect installation position leads to premature wear of the rear crankshaft radial shaft sealing ring (1).
The protective lip (1 s) must to the transmission housing along the entire circumference.
