C 230 (203.040) L4-1.8L SC (271.948) (2005)
5 Separate insertion tool
6 Mount the end cover (2) with the rear crankshaft radial shaft sealing ring (1 ) and the insertion tool (6) on the contact surface (3a) of the crankshaft
flange (3).
The contact surface (3a) must not be rubbed with emery cloth because this causes irreparable damage to the crankshaft surface rendering the
crankshaft unusable.
7 Tighten the bolts (2a) crosswise in steps. Observe tightening torques.