C 230 (203.040) L4-1.8L SC (271.948) (2005)
4 Mount the rear crankshaft radial sealing ring (1 ) on to the insertion toothy (6).
Ensure that the protective lip (1 s) points in the direction of the outgoing-power side and the sealing lip (1 d) points against the outgoing-power side.
Otherwise, there may be leakage at the rear crankshaft radial sealing ring (1). m The rear crankshaft radial sealing ring (1 ) can be fitted on the
insertion took (6) only if insertion tool (6) is fitted together with insertion tool (7) . (7) from insertion tool (6).