C 350 (204.056) V6-3.5L (272.961) (2008)
/v6-3.5l_(272.961)/Page-2310007.png)
Component Identification
24
Insert suspension strut (6) and mount nut on piston rod.
Counterhold piston rod with Ton( TX50
Observe position of front spring (1) in lower spring cup (8). The end of the spring coil must abut the end stop (9) in the lower spring cup (8).
25
Release front spring (1) until the release position "L5" is reached.
Do not release front spring (1) further on account of risk of damaging the clamping devices part 1, 2 (01, 02).
26
Detach clamping device part 2 (02) from clamping device part 1 (01) with clamp screws (2).
27
Move tensioning device (06) into removal position "L4".
Remove suspension strut (40) from upper and lower clamping plate (04, 05).
AR32.20-P-0200-06CW Clamping Rear Spring
AR32.20-P-0200-06CW Clamping rear spring
Special Tools
