CL 55 AMG (215.374) V8-5.5L SC (113.991) (2004)
-
Installation: Turn back adjusting mechanism (105) and insert into both brake shoes (103) such that the adjusting wheel (c) points in the
direction of travel.
9
Detach upper retracting spring (112).
CAUTION: Installation: Ensure that the retracting spring (112) is seated correctly. Coat thread of thrust piece (104) and cylindrical
part of adjusting wheel (c) with MB long-term grease.
10
Remove expanding lock (109)
CAUTION: Installation: Coat all bearing and sliding surfaces on the expanding lock (109) with MB long-term grease.
Inspecting
11 Inspect cap (110).
-
Model 230
NOTE: Ensure cap (110) is seated firmly and inspect for score marks and deformation, replace if necessary, notes on installing the cap (110) on
the brake stator
12
Install in the reverse order
13
Activate SBC brake system using STAR DIAGNOSIS.
-
Model 230
14
Relieve load on automatic slack adjuster.
15
Check version of pedal assembly
16
Adjust parking brake