mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Procedures|Page 13999 > < Procedures|Page 13997
Page 5
background image

15. Fasten inner section (17) at left and right side to front bumper paneling (1) with 8 blind rivets (19).

Component Identification

16. Fasten swip clips (20) on outer right and left of headlamp cutouts with one blind rivet each.

Vehicles with Parktronic system (PTS) Code 220

17.1. Insert PTS wiring harness (21) removed from standard bumper into inner section (17) and fasten to brackets present.

On models 209.377/477 the PTS, front bumper connector (X26/27) is fastened to the inner section (17) at the bottom right using a cable tie.

Procedures|Page 13999 > < Procedures|Page 13997