mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

Body - C-Pillar Weatherstrip Separated From C-Pillar|Page 14975 > < Removal and Replacement|Page 14966
Page 1
background image

Rear Door Weatherstrip: All Technical Service Bulletins
Body - C-Pillar Weatherstrip Separated From C-Pillar

Date: June 26, 2007

Order No.: P-B-72.12/50a

Supersedes: P-B-72.12/50 dated October 13, 2005

Group: 72

Revision History

Revision

Date

Purpose

a

6/26/07

Applicable Models and Warranty Information Updated

-

10/13/05

Initial issue

SUBJECT:
Model 219.372/375/376/377, Up to VIN A070868

C-Pillar Weather Strip Unglued

If you receive customer reports in the above model vehicles where the weather strip has separated from the C-pillar (Figure 1), re-glue the weather
strip to the vehicle as outlined below to resolve.

1.

Lift weather strip where separated to apply adhesive (Figure 1).

2.

Thinly coat adhesive tape surface where separated with adhesive loctite (Figure 2, box).

3.

Immediately press weather strip against body in the correct position and hold for 1 minute.

Body - C-Pillar Weatherstrip Separated From C-Pillar|Page 14975 > < Removal and Replacement|Page 14966