CLS 550 (219.372) V8-5.5L (273.960) (2007)
- with CODE (386) Preinstallation for "portable CTEL" UPCI telephone system
- with CODE (387) Preinstallation for telephone "handy" UPCI system, USA/Canada
- with CODE (388) "Portable CTEL"
Repair Materials
1. Route microphone array wiring harness (1) starting at overhead control panel retaining frame (3) as illustrated.
The microphone array wiring harness (1) thereby makes direct contact to the overhead control panel wiring harness (4) over the entire length.
The microphone array wiring harness (1) has a green marking (arrow A) for the excess length on the overhead control panel retaining frame (3).
The marking (arrow A) should be located at the edge of the overhead control panel retaining frame (3) as illustrated. The yellow marking is
located on the retainer tab (arrow B) as illustrated
2. Fasten microphone array wiring harness (1) to headliner (2) with strips of adhesive tape, approx. 10 cm long.
The strips of adhesive tape should have a distance of at least approx. 12 cm to the left exterior contour of the headliner (2). Otherwise the left
windowbag may be restricted.
Press on strips of adhesive strips firmly, otherwise the microphone array wiring harness (1) can detach itself from the headliner (2).
Glue strips of adhesive tape to present strips of adhesive tape on the mount for the overhead control panel wiring harness (4).
AR68.30-P-4305-03TX Install Microphone Wiring Harness For Sound System In Headliner
AR68.30-P-4305-03TX Install Microphone Wiring Harness For Sound System In Headliner
- with CODE (810) Sound system
Repair Materials