E 63 AMG Sedan (212.077) V8-6.3L (156.985) (2010)
Task
The control and operating unit has the following tasks:
^
Operation of the vehicle's climate control
^
Reading in of sensors and signals
^
Evaluation of input factors
^
Actuation of components
Operation of the vehicle's climate control
The control and operating unit enables the following operations:
-
Interior temperature selection separated for the left and right side
-
Automatic blower control and air distribution
-
Manual blower control and air distribution
-
Switching the automatic air conditioning on and off
-
Defrost function
-
Switching the A/C compressor (A9) on and off
-
Mono mode
-
Recirculated air mode
-
Maximum cooling output (with code (494) USA version)
-
Residual engine heat utilization system (with code (965) Electrical preinstallation for rental vehicle)
-
Control of the rear window heater (R1)
It is operated with the following buttons:
^
"OFF" button
^
Temperature rocker
^
Air volume rocker
^
Air distribution rocker
^
"AUTO" button
^
"A/C" button (without code (965)
^
Electrical preinstallation for rental vehicle)
^
"A/C, REST" button (with code (965) Electrical preinstallation for rental vehicle)
^
Rear window heater button
^
"ZONE" button
^
Air recirculation mode button
^
Defrosting button
^
"MAX COOL" button (with code (494) USA version)
"OFF" button
The automatic air conditioning can be switched off completely or switched back on by pressing the "OFF" button.
Temperature rocker
Pressing the temperature rocker enables the required specified temperature to be set for the left and right sides. The temperature is shown on the display.
With the temperature set to the maximum, the "HI" indication appears in the display and with the temperature set to the minimum, the "LO" indication
appears in the display.
Air volume rocker
The air volume can be adjusted manually by actuating the air volume rocker. The selected setting is shown on the display.
Air distribution rocker
The air volume can be adjusted by actuating the air volume rocker. The selected air distribution setting is shown on the display.
"AUTO" button
The air volume and the air distribution are controlled automatically when the "AUTO" button is pressed. If the automatic mode is activated, the
light-emitting diode (LED) for the "AUTO" button lights up.
"A/C" button (without code (965) Electrical preinstallation for rental vehicle)
Pressing the "A/C" button switches the refrigerant compressor on or off with "circuit 61 ON".