mercedesbenz Workshop Repair Guides

Mercedes Benz Workshop Service and Repair Manuals

ABOUT US
Recall - Liftgate Control Module/Tail Lamp Seals|Page 14291 > < Recall - Liftgate Control Module/Tail Lamp Seals|Page 14289

GL 320 BLUETEC (164.825) V6-3.0L DSL Turbo (642.820) (2009)

Page 4
background image

12. Clean body mating surface (Figure 6) with cleaner (see notes above) then carefully align holes of new tail lamp seals with vehicle's mounting holes
then affix seals (A, Figure 7) onto vehicle's body.

Note:

Affix new seals with adhesive towards body: Seal marked left will be installed on right side of vehicle, seal marked right will be installed on left side of
vehicle.

13. Reassembly is in reverse order.

Recall - Liftgate Control Module/Tail Lamp Seals|Page 14291 > < Recall - Liftgate Control Module/Tail Lamp Seals|Page 14289