GL 320 CDI (164.822) V6-3.0L DSL Turbo (642.940) (2008)
-
Torque requirement of refrigerant compressor, torque correction
Steering column module
-
Signal from steering wheel gear shifter MINUS (S110/1), on model 164.177
-
Signal from steering wheel gear shifter PLUS (S111/1), on model 164.177
-
Signal from left steering wheel gear shifter (S110/2), except model 164.177
-
Signal from right steering wheel gear shifter (S111/2), except model 164.177
-
Signal from DIRECT SELECT gear selector switch (S16/13)
Central gateway control unit
-
Diagnosis
The following information is passed to other systems:
Instrument cluster
-
Gear selector switch position and selected shift range for multifunction display (A1p13)
-
Transmission mode selection for multifunction display
Intelligent servo module for DIRECT SELECT
-
Specified position of selection range lever
CDI control unit (with engine 629, with engine 642)
-
Starter lockout release in selector lever position "P", "N"
-
Transmission variant, recognition of basic variants, difference in gear ratios
-
Actual gear and target gear, gear engaged, gear to be shifted, can be shown using STAR DIAGNOSIS
-
Status of torque converter lockup clutch
-
Engine torque requests, engine intervention when shifting Limp-home of fully integrated transmission control (VGS)
-
Transmission oil temperature, actuation of transmission oil cooler circulation pump (M13/7) and actuation of engine and air conditioning electric
suction fan with integrated control (M4/7), in combination with engine 642
ME-SFI [ME] control unit (except engine 629, except engine 642)
-
Engine torque requests, engine intervention when shifting
-
Limp-home of fully integrated transmission control (VGS)
-
Starter lockout release in gear selector switch position "P", "N"
-
Transmission variant, recognition of basic variants, difference in gear ratios
-
Actual gear and target gear, gear engaged, gear to be shifted, can be shown using STAR DIAGNOSIS
-
Status of torque converter lockup clutch
ESP control unit
-
Wheel torque factor, overall gear ratio
-
Transmission variant, recognition of basic variants, difference in gear ratios
-
Actual gear, target gear, gear engaged, gear to be shifted, can be shown using STAR DIAGNOSIS
EIS [EZS] control unit
-
Position of selector range lever for the actuation of the reversing lamp function
Central gateway control unit
-
Position of selector range lever for the actuation of the reversing lamp function
-
Diagnosis