GL 450 (164.871) V8-4.6L (273.923) (2007)
AZ82.60-P-0005-01GZ Install DVD Player
- except CODE (864) Rear entertainment system
Model 164.8
1
Remove bracket (3).
2
Cut cutout (22) for DVD player out of floor covering.
Use the cutout (22) present in the body as a template. Ensure that cuts are straight and that the cutout (22) in the floor covering is the same size as
the cutout in the body.
3
Attach sheet metal nuts (20) at holes above cutout (see arrows).
4
Fasten brackets (17) on left and right of DVD player (18) with two screws (19).
The brackets are the same for the left and right side. Do not tighten screws/bolts (19) yet.
5
Affix self-adhesive velcro strip (26) to the lugs (27) of the bracket (17) as shown in the picture.
If there are bores in the lugs (27) of the bracket (17), do not affix velcro strip (26).