S 430 (220.170) V8-4.3L (113.941) (2000)
/v8-4.3l_(113.941)/Page-3647007.png)
7.
The voice activation module 15-pole D-sub and optical connector should be located in the left rear corner after lowering the bracket assembly
(Figure 9).
8.
Mount the linear compensator to the bracket with three (3) M4 x 10 bolts and three (3) M4 nuts and ensure that connector placement allows for
proper alignment during final assembly (Figure 10).
9.
Connect the green 14-pole Y-cable connector to the linear compensator.
10.
Mount the antenna switch to the bracket with two (2) M4 self-tapping TORX screws (Figure 11).
