S 500 Coupe (140.070) V8-5.0L (119.980) (1997)
-
Tighten brake pipe (5) on brake hose (51) to:
Except model 210 14 Nm
Model 210: 18 Nm
-
Tighten brake hose (51) on fixed caliper (31) to: 18 Nm
-
Refer to Replacement, for notes on installing brake hoses. See: Brake Hose/Line/Service and Repair
NOTE:
^
Brake hose connection on brake pipe modified.
^
The versions must not be mixed up
-
Refer to notes on installing brake pad wear indicator contact sensors. See: Brake Warning Indicator/Brake Pad Wear Sensor/Service and
Repair
6. Bleed brake system. See: Brake Bleeding/Service and Repair
7. Check brake system for leaks, refer to Using Pedal Pressure. See: Testing and Inspection
With AMG Engineering Package
NOTE: For model name/model number cross reference refer to Model Designation Table. See: Application and ID
DANGER
^
Risk of poisoning due to consuming brake fluid.
^
Risk of injury due to brake fluid coming into contact with the skin or eyes.
^
Only pour brake fluid into suitable, appropriately marked containers.
^
Wear protective clothing and safety glasses when handling brake fluid.
Removal
NOTE:
^
Refer to Notes On Brake Fluid. See: Service Precautions/Vehicle Damage Warnings
^
Refer to Notes on Test and Repair Work to brake system. See: Service Precautions/Vehicle Damage Warnings
1. First disconnect brake hose (51) on brake pipe (5) and then on fixed caliper (31).
-
Immediately seal connections with plugs.
-
The brake fluid reservoir must not empty completely.
2. Disconnect rear brake pad wear pad wear sensor (S10/4) at rear brake pad wear sensor connector.