mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Airbag Disposal Procedures|Page 3757 > < Airbag Disposal Procedures
Page 2
background image

wire to each of the airbag module wires.

3.

Place the module with the black trim cover facing upward on a flat surface in a remote area such as a parking lot or field. Do not place the
module with the trim cover facing down, as the forces of the deploying airbag may cause the module to ricochet and cause personal
injury.

4.

Remaining at least 20 feet away from the module, deploy the airbag by touching the other ends of the two wires to the terminals of a 12 volt
vehicle battery.

5.

If successful, a loud report will be heard and the airbag material will be visible coming from the top of the module. Allow at least 10 minutes
before approaching the airbag to allow for cooling of the module and dissipation of the effluents.

Airbag Disposal Procedures|Page 3757 > < Airbag Disposal Procedures