mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Recall - A/T Oil Cooler Line Replacement|Page 3555 > < Recall - A/T Oil Cooler Line Replacement|Page 3553
Page 3
background image

8.

Lower car on hoist.

9.

Connect upper transaxle cooler hose to transaxle, torque new clamp to 4 N-m (35 in.lbs.).

10.

Check transaxle oil level. (reference Shop Manual Section 17-27)

11.

Close hood.

AUTOMATIC TRANSAXLE OIL COOLER INLET HOSE AND CLAMP REPLACEMENT KIT INSTALLATION INSTRUCTIONS

Owner Letter

Serial Number: 12345678901234567    91S22             February, 1991

Mr. John Sample 
123 Plain Street 
Anywhere, USA 12345

This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.

Ford Motor Company has determined that a defect which relates to motor vehicle safety exists in certain 1991 model Capri vehicles equipped with
automatic transaxles.

Safety Defect
The transaxle oil cooler inlet hose on your car could come loose. If this happens, transmission fluid leakage could occur. Fluid leakage in the presence of
an ignition source could result in a fire.

Repairs
At no cost to you, your dealer will replace the oil cooler hose and clamps.

Recall - A/T Oil Cooler Line Replacement|Page 3555 > < Recall - A/T Oil Cooler Line Replacement|Page 3553