mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Pump to Steering Gear|Page 6917 > < Pump to Steering Gear|Page 6915
Page 5
background image

21. CAUTION:  Make sure the power steering fluid does not contaminate the accessory drive belt. 

Disconnect the high-pressure tube union 
1

Detach the clamp.

2

Disconnect the tube union.
^

Allow the fluid to drain into a suitable container.

All Vehicles 
22. Raise and support the vehicle.
23. Remove the two splash shields (wheel removed for clarity).

Vehicles With 2.5L Engine 
24. Remove the night-hand side tie-rod end retaining nut.

Pump to Steering Gear|Page 6917 > < Pump to Steering Gear|Page 6915