Cougar V6-153 2.5L DOHC VIN L SFI (2001)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Crankshaft Pulley
Special Tools
Special Tools
Removal
1. Remove the right-hand wheel.
2. Remove the right-hand fender splash shields.
1
Remove the bolts.
2
Remove the shields.
3. Remove the accessory drive belt.
4. CAUTION: Prevent the crankshaft from rotating in a counterclockwise direction during the crankshaft pulley bolt removal.
NOTE: The crankshaft pulley bolt is torque to-yield and must not be reused.
Remove the crankshaft pulley bolt and washer.
1
Install a suitable strap wrench to hold the crankshaft pulley.
2
Remove the crankshaft pulley bolt.