Cougar/XR7 V8-4.6L VIN W (1997)
16. Install the engine front cover.
17. Position and, using Silicone Gasket and Sealant F6AZ-19562-AA or equivalent meeting Ford specification WSE-M4G323-A6, secure gaskets into
valve covers.
18. Apply Silicone Gasket and Sealant F6AZ-19562-AA or equivalent meeting Ford specification WSE-M4G323-A6 at both places engine front cover
meets cylinder head.
NOTE:
^
Prior to applying sealer, clean sealing surfaces with Metal Surface Cleaner F4AZ-19A536-RA or equivalent meeting Ford specification
WSE-M5B392-A to remove all residue that may interfere with the sealer's ability to adhere.
^
Install valve covers and retainers no more than four minutes after applying sealer.
19. Install RH valve cover, bolts and stud bolts. Tighten to 8-12 Nm (71-106 inch lbs.) in no more than four minutes after applying sealer.
