Grand Marquis V8-4.6L Flex Fuel (2010)
Removal and Installation
1. WARNING: Shut off the electrical power to the air suspension system prior to hoisting or jacking an air suspension equipped vehicle.
Failure to do so may result in unexpected inflation or deflation of the air springs, which may result in shifting of the vehicle during these
operations. Failure to follow this instruction may result in serious personal injury.
If equipped, turn the air suspension switch OFF.
2. WARNING: If equipped with fire suppression system, refer to Vehicle Jacking and Lifting for Important Safety Warnings. Failure to
follow this instruction may result in serious personal injury.
With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
3. Disconnect each transmission fluid cooler tube from the transmission fluid cooler.
-
To install, tighten to 20 Nm (177 lb-in).
4. Disconnect the transmission fluid cooler tube(s) from the transmission fluid cooler tube retainer.
5. Remove the transmission fluid cooler tube bracket-to-A/C compressor nut.
-
To install, tighten to 9 Nm (80 lb-in).
6. Disconnect each transmission fluid cooler tube from the transmission.
-
To install, tighten to 20 Nm (177 lb-in).
