Mariner 2WD L4-2.3L VIN H Hybrid (2006)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor Ring - Rear
Wheel Speed Sensor Ring - Rear
Wheel Speed Sensor Ring - Rear
Removal and Installation
FWD vehicles
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the wheel hub nut.
^
To install, tighten to 290 Nm (214 ft. lbs.).
3. Remove the sensor ring from the wheel hub.
4. To install, reverse the removal procedure.
4WD vehicles
5. The rear wheel speed sensor ring is integral to the rear axle halfshaft and cannot be repaired separately.
