Mariner 2WD V6-3.0L (2008)
Removal
WARNING:
-
Always wear eye protection when servicing a vehicle. Failure to follow this instruction may result in serious personal injury.
-
Wear protective gloves when handling components or parts that have pointed or sharp edges. Failure to follow this instruction may result
in serious personal injury.
1. Remove the LH and RH A-pillar trim panels.
2. Remove the 2 windshield side garnish mouldings.
3. Open the front overhead console door, remove the 2 screws and the overhead console.
-
If equipped, disconnect the electrical connector.
4. Remove the interior rear view mirror.
5. Remove the LH and RH sun visors and visor clips.
-
If equipped, disconnect the electrical connectors.
6. Partially lower the front portion of the headliner and block with a suitable material.
7. Remove the cowl panel grille.
8. Using a soft brush or vacuum, remove any dirt or foreign material from the pinch weld.
