Mariner 2WD V6-3.0L VIN 1 (2006)
13. Release the side air bag module deployment chute J-clip from around the side air bag module.
14. Feed the side air bag module deployment chute, J-clips, and hook and loop retainer out through the side air bag module seat back foam opening.
15. Continue to roll seat trim cover up to access the side air bag module.
16. Detach the 2 side air bag module wiring harness retainers from the seat backrest frame.
17. Remove the 2 side air bag module nuts and remove the side air bag module.
Installation
WARNING:
-
Inspect the mounting surfaces of the side air bag module and the seat back frame mounting bracket for any foreign objects before
installing the side air bag module. If any foreign objects are found, remove them. Failure to do so may result in personal injury, in the
event of an air bag deployment.
