Milan FWD L4-2.3L (2008)
Parking Brake Cable: Adjustments
Parking Brake Cable Adjustment
1. NOTE: Do not pry at the floor console rear access panel with a screwdriver or damage to the panel may occur.
Remove the floor console rear access panel.
2. With the vehicle in NEUTRAL, position it on a hoist.
3. NOTE: The dimension will vary depending on the amount of cable stretch. New cables require cycling the parking brake control 5-10 times to
remove the cable slack.
Adjust the parking brake adjustment nut as shown.
4. Verify correct operation of the parking brake system.
^
At 2 clicks of the parking brake control, slight drag at the rear wheels should be present.
^
At 5 clicks of the parking brake control, no movement at the rear wheels should be present.
5. Install the floor console rear access panel.
