Milan FWD V6-3.0L (2010)
-
Disconnect: APIM C3338 .
-
Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and ground; and between the DLC C251-11, circuit
VDB07 (VT/OG), harness side and ground.
-
Are the resistances greater than 1,000 ohms?
Yes
CONNECT the negative battery cable. GO to AC65.
No
GO to AC48.
-------------------------------------------------
AC48 VERIFY VEHICLE EQUIPMENT - DDM
-
Verify whether the vehicle is equipped with a Driver Door Module (DDM).
-
Is the vehicle equipped with a DDM?
Yes
GO to AC49.
No
GO to AC50.
-------------------------------------------------
AC49 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TO GROUND WITH THE DDM DISCONNECTED
-
Disconnect: DDM C568b .
-
Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and ground; and between the DLC C251-11, circuit
VDB07 (VT/OG), harness side and ground.
-
Are the resistances greater than 1,000 ohms?
Yes
CONNECT the negative battery cable. GO to AC66.
No
GO to AC50.
-------------------------------------------------
AC50 VERIFY VEHICLE EQUIPMENT - SIDE OBSTACLE DETECTION
