mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3261 > < Initial Inspection and Diagnostic Overview|Page 3259
Page 129
background image

-

Is the resistance less than 5 ohms?

Yes

If the vehicle is equipped with a Power Steering Control Module (PSCM), GO to AE19. 

If the vehicle is not equipped with a PSCM, GO to AE20. 

No

CONNECT the negative battery cable. GO to AE46.

-------------------------------------------------
AE19 CHECK THE HS-CAN (+) AND HS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE PSCM DISCONNECTED

 

-

Disconnect: Power Steering Control Module (PSCM) C1467b .

-

Measure the resistance between the DLC C251-6, circuit VDB04 (WH/BU), harness side and the DLC C251-14, circuit VDB05 (WH), harness
side.

-

Is the resistance less than 5 ohms?

Yes

GO to AE20. 

No

CONNECT the negative battery cable. GO to AE47.

-------------------------------------------------
AE20 CHECK THE HS-CAN (+) AND HS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE OCSM DISCONNECTED

 

-

Disconnect: Occupant Classification System Module (OCSM) C3159 .

-

Measure the resistance between the DLC C251-6, circuit VDB04 (WH/BU), harness side and the DLC C251-14, circuit VDB05 (WH), harness
side.

-

Is the resistance less than 5 ohms?

Yes

If the vehicle is equipped with a Transmission Control Module (TCM), GO to AE21. 

If the vehicle is not equipped with a TCM, GO to AE22. 

Initial Inspection and Diagnostic Overview|Page 3261 > < Initial Inspection and Diagnostic Overview|Page 3259