Milan FWD V6-3.0L (2010)
-
Is the resistance less than 5 ohms?
Yes
For gasoline engine, REPAIR the circuits. CONNECT all modules. CONNECT the negative battery cable. CLEAR the DTCs. REPEAT the network test
with the scan tool.
For hybrid, GO to AE25.
No
CONNECT the negative battery cable. GO to AE51.
-------------------------------------------------
AE24 VERIFY VEHICLE EQUIPMENT - HYBRID
-
Verify whether the vehicle is a hybrid.
-
Is the vehicle a hybrid?
Yes
GO to AE25.
No
REPAIR the circuits. CONNECT all modules. CONNECT the negative battery cable. CLEAR the DTCs. REPEAT the network test with the scan tool.
-------------------------------------------------
AE25 CHECK THE HS-CAN (+) AND HS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE ACCM DISCONNECTED
-
Disconnect: Air Conditioning Compressor Module (ACCM) C1469a .
-
Measure the resistance between the DLC C251-6, circuit VDB04 (WH/BU), harness side and the DLC C251-14, circuit VDB05 (WH), harness
side.
-
Is the resistance less than 5 ohms?
Yes
GO to AE26.
No
CONNECT the negative battery cable. GO to AE52.
-------------------------------------------------
AE26 CHECK THE HS-CAN (+) AND HS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE BECM DISCONNECTED
