Mountaineer 2WD V6-4.0L VIN K (2007)
Accumulator HVAC: Service and Repair
Suction Accumulator to Evaporator Line
SUCTION ACCUMULATOR TO EVAPORATOR LINE
Removal and Installation
NOTE: Installation of a new suction accumulator is not required when repairing the air conditioning system, except when there is physical evidence of
contamination from a failed A/C compressor or damage to the suction accumulator.
All vehicles
1. Remove the suction accumulator.
2. Remove the powertrain control module (PCM) and PCM bracket.
3. Remove the A/C line bracket nut at the dash panel and remove the A/C line bracket.
-
To install, tighten to 6 Nm (53 lb-in).
