Mountaineer 4WD V8-302 5.0L VIN P SFI (2000)
2. Position the tube bushing removal tools.
1. Position the Bushing Cup Remover/Replacer.
2. Position the Drawbolt.
3. Thread the Bushing Remover on the Drawbolt.
3. Tighten the Drawbolt to remove the tube bushing.
Installation
1. Note: Axle tube bushing installation shown, axle housing bushing is a similar procedure.
Position the tube bushing and the tube bushing installation tools.
1. Position the tube bushing.
2. Position the Ring Gauge.
3. Position the Bushing Collet Replacer.
4. Position the Bushing Cup Remover/Replacer.
5. Position the Drawbolt.
6. Thread the Bushing Replacer on the Drawbolt.
2. Tighten the Drawbolt to install the tube bushing.
-
Remove the tools.
