Mountaineer AWD V8-4.6L VIN 8 (2006)
Remove the brake disc.
Installation
NOTE: If the adjustment hole knockout panel or access plug was removed, it is necessary to install an access plug to prevent the entry of
containments.
1. Clean any rust or foreign material from brake disc and wheel hub.
^
Use parts cleaner to clean the front brake disc and hub surfaces.
2. Install the brake disc.
3. Position the brake caliper and brake pad assembly. Install the 2 brake caliper bolts.
^
Tighten to 32 Nm (24 ft. lbs.).
4. Test the brakes for normal operation.