Mystique V6-153 2.5L DOHC VIN L SFI (1999)
8. Use Interior Auto Glass Cut-out Knife No. 164-R2450 or equivalent to cut out the PU adhesive, using the 4 in cutter blade on the top and the side
edges of the heated rear window glass.
WARNING: WEAR GLOVES AND EYE PROTECTION WHEN WORKING WITH THE GLASS CUTTING TOOL AS THE
CUTTING OPERATION MAY PRODUCE SPLINTERS. WHEN USING THE CUTTER WEAR EAR PROTECTION. FAILURE TO
FOLLOW THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
NOTE:
-
Lubricate the PU adhesive where it meets the glass with EC7784 lubricant or equivalent (10:1 ratio of water to soap) to aid Interior Auto Glass
Cut-Out Knife Kit, when cutting the PU adhesive.
-
If the heated rear window is to be re-installed, make sure the cutter blade is kept low when cutting in the area of the heated rear window
connectors.
9. Cut the bottom edge of the heated rear window glass using Interior Auto Glass Cut-Out Knife No. 164-R2450 fitted with the 8 in cutter blade.
10. With the aid of another technician, use suction cups to remove the heated rear window glass.
INSTALLATION
CAUTION: During the curing period of the PU adhesive, the door windows must be left open to avoid a build up of pressure when the doors are
opened and closed.
