Sable V6-182 3.0L (1986)
23.
Remove three (3) heater case-to-dash panel attaching nuts located in engine compartment.
24.
Remove two (2) screws attaching top brackets to cowl top panel, then carefully pull heater assembly from dash panel and remove from vehicle.
25.
Remove vacuum source line from heater core tube seal, then remove heater core tube seal.
Fig. 29 Heater core removal
26.
Remove four (4) heater core access cover attaching screws, then the access cover.
27.
Remove heater core and seals from heater case.
28.
Reverse procedure to install.
29.
Recharge the A-C system using 44 ± 2 oz. Refrigerant 12 (R-12).
