Sable V6-183 3.0L DOHC VIN S MFI (1997)
INSTALLING SHOES
1. Apply a light coating of Silicone Brake Caliper Grease and Dielectric Compound to rear brake backing plate-brake shoe contact areas.
2. Apply a light coat of Premium Long-Life Grease XG-1-C or-K or equivalent to threaded areas of brake adjuster screw and brake shoe adjusting
screw socket. Assemble brake adjuster with stainless steel washer. Turn brake shoe adjusting screw socket all the way down on screw, then back
off one turn.
3. Install parking brake lever to trailing shoe with spring washer and new parking brake lever pin retainer. Crimp parking brake lever pin retainer to
securely retain parking brake lever.
4. Position trailing shoe on rear brake backing plate. Install brake shoe hold-down spring pin and brake shoe hold-down spring. Attach rear parking
brake cable.
5. Position leading shoe on rear brake backing plate. Install brake shoe hold-down spring pin and brake shoe hold-down spring. and attach lower
brake shoe adjusting screw spring to brake shoes.
NOTE: Socket blades and adjusters are marked R and L. Install socket blades with letter in upright position to make sure of proper slot
engagement to brake shoe adjusting lever.
