Sable V6-3.0L DOHC VIN S (2002)
Trunk / Liftgate Lock Cylinder: Service and Repair
Liftgate Lock Cylinder
REMOVAL
NOTE: Individual lock cylinders are repaired by discarding the inoperative cylinder and building a new lock cylinder using the appropriate lock repair
package. The lock repair package includes a detailed instruction sheet to build the current key code of the vehicle.
1. Remove the liftgate trim panel.
2. Disconnect the liftgate lock cylinder actuating rods.
^
Open the clips.
3. Remove the nuts and the liftgate lock cylinder.
INSTALLATION
1. To install, reverse the removal procedure.
