Sable V6-3.0L DOHC VIN S (2002)
3. Remove the outboard tether anchor bolts.
1
Remove the bolts.
2
Remove the outboard tether anchor assembly.
NOTE: The driver side is shown, the passenger side is similar.
INSTALLATION
All tether anchors
1. To install, reverse the removal procedure.
^
Refer to the removal procedure or Specifications for torque specifications.
WARNING: IT IS IMPORTANT THAT THE BOLT/ANCHOR BE SECURELY TIGHTENED TO SPECIFICATION. OTHERWISE,
THE CHILD'S SAFETY SEAT MAY NOT BE PROPERLY SECURED, AND THE CHILD CAN BE INJURED IN CASE OF A
SUDDEN STOP OR ACCIDENT.
NOTE:
^
Rework the sheet metal to its original condition and structural integrity.
^
Make sure to tighten the bolts to specification.
^
Make sure that the safety belt buckles are accessible after seat installation.
2. Check the restraint system for correct operation.