Sable V6-3.0L VIN 2 Flex Fuel (2005)
Camshaft Position Sensor: Service and Repair
Camshaft Position (CMP) Sensor
CAMSHAFT POSITION (CMP) SENSOR
Removal and Installation
1. Disconnect the battery ground cable.
2. Remove the accelerator cable snow shield.
-
Remove the pin-type retainers.
-
Remove the accelerator cable snow shield.
3. Detach the spark plug wire retainer.
4. Detach the wiring harness from the intake manifold support.
5. NOTE: The upper intake manifold is removed for clarity.
Release the fuel charging wiring harness from the valve cover studs. Position the wiring harness away from the camshaft position sensor.
