Sable AWD V6-3.5L (2008)
8. Remove the pin-type retainers.
9. Release the J-clip at the bottom of the backrest trim cover and release the trim cover hook-and-loop strips at the back.
10. CAUTION: Use care when separating the seat backrest trim cover from the hook-and-loop strip. The hook-and-loop strip may be torn
from the seat backrest foam.
Release the hook-and-loop strips, invert the trim cover and remove the 3 rows of hog rings.
-
Invert the trim cover to the headrest guide sleeves.
11. Pull the latch release strap through the trim cover.
12. Lift the backrest foam pad, pinch the head restraint guide together and remove the 2 head restraint guides.
13. Remove the backrest trim cover.
14. To install, reverse the removal procedure.
