Topaz FWD L4-140 2.3L HSC (VIN X) (1989)
/Page-1535008.png)
Figure 10
2.
Inspect the "A" pillar limit switch bracket for possible rework.
a.
If the bracket has a long narrow locator tab as shown in Figure 10, remove it for rework.
b.
If the bracket does not have a locator tab, leave it attached to the track assembly and proceed to Step 2d.
Figure 11
c.
Remove the bracket locator tab as shown in Figure 10. Install the reworked bracket to the track assembly, Figure 11.
