Tracer L4-110 1.8L DOHC (1995)
Camshaft Pulley Timing Marks
8. Rotate crankshaft and align timing marks located on camshaft pulleys and seal plate.
9. If timing belt is to be reused, mark an arrow on timing belt to indicate its rotational direction for installation reference.
10. Loosen timing belt tensioner and remove belt.
INSTALLATION
1. Temporarily secure timing belt tensioner in far left position with spring fully extended, then tighten lock bolt.
Aligning Crankshaft Pulley Timing Marks
2. Ensure that timing marks on timing belt pulley and engine block are aligned.
