Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
c.
Remove the two (2) LH inner Instrument Panel (I/P) lower cover screws and the plastic nut (Figure 1).
d.
Disconnect the antenna lead cable connector from the timer module (Figure 2).
e.
Remove the instrument cluster using the procedure outlined in the Service Manual, Page 13-01B-30.
f.
The antenna-to-antenna lead connector is located in the center of the I/P cluster area. It is gray in color and is retained to the -14401- wiring
harness shield (Figure 3).
