Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
6. Remove and discard the dust seal.
Piston Seal
7. Use a pick to remove the piston seal from the piston bore. Discard the piston seal.
CAUTION: Use a plastic or wooden pick to remove the piston seal. Do not use a metal tool. A metal tool can scratch or nick the piston
seal groove and result in a possible piston seal leak.
CLEANING AND INSPECTION
Inspect the front disc brake caliper bore, caliper piston, and piston seal groove for:
^
Cuts
^
Deep scratches
^
Pitting
^
Presence of foreign materials
The caliper piston and front disc brake caliper bore may be lightly polished with crocus cloth but if deep scratches remain, replace the front disc brake
caliper. The piston seal groove in the front disc brake caliper must not have deep scratches that would prevent the piston seal from working properly.
ASSEMBLY
