Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Wheel Speed Sensor: Service and Repair
Rear
REMOVAL
1. Raise and support the vehicle.
Remove Rear Brake Anti-Lock Sensor Bolt
2. Remove the rear brake anti-lock sensor bolt.
3. Remove the rear brake anti-lock sensor from the brake backing plate.
Remove Rear Brake Anti0Lock Sensor Cable
4. Remove the rear brake anti-lock sensor cable-to-rear axle housing bracket bolt and bracket from the rear axle housing.
Remove Rear Anti-Lock Sensor Cable-To-Body Bracket Bolt
5. Remove the rear brake anti-lock sensor cable-to-body bracket bolt.